Let's Hear What Our
Customers Say
You May Also Like
- Choosing a selection results in a full page refresh.
Extra 10% off on FumeClear FC-350 Fume Extractor Now Learn More
XL-300 Promotion,Get an Extra 15% Discount Learn More
6% off for First Purchase, Code：FUMECLEAR
products details
specifications
reviews
product service
Boasting a triple-layer filtration system, it starts by sieving out coarse particulates on the initial layer, then nabs finer dust on the second, and culminates with the third layer purifying the air to perfection, ensuring a clean, contaminant-free airstream for a healthy workspace.
The built-in brushless motor is a real workhorse. Its design allows for seamless operation, churning out robust torque for top-notch performance. Minimizing friction-induced wear and tear compared to brushed variants, it sips energy sparingly and touts an extended service life, sparing you the headache of frequent upkeep and costly replacements down the line.
Equipped with a sophisticated anti-clogging mechanism, it stands as a stalwart shield against blockages. It wards off the accumulation of debris – be it sawdust, metal shavings, or other pesky particles – that could gum up internal passages. By keeping everything flowing freely, the equipment stays in peak operating condition, maximizing productivity around the clock.
This equipment hums along at a barely audible volume, making it a breeze to work alongside without the slightest distraction. Thanks to its cutting-edge engineering, noise output during operation is dialed down to a minimum, fitting snugly into any work setting, whether a bustling factory floor or a hushed office cubicle, and providing a tranquil work ambience.
Specifications
Model
FC-2002
Flow
153CFM
Air inlet interface
Φ75mm *1 flange
Noise
<55 dB
Filter Stages
1. Pre-filter
2. Medium HEPA filter
3. Main carbon filter
Dimensions(L*W*H)
11.22*11.22*17.73 inches
Weight
23.6 lbs
Power
160W
Certification
CE & FCC
I was not expecting this level of quality. This is actually well made and the electronic controls were a big plus. In fact, it seemed a bit over-designed. Overall, the suction is good for general laser engraving and cutting 3mm plywood, and the multiple filters held up well. It’s built like a tank and delivered on the listing promise. I should note, this would not be big enough for laser cutting 1/2” wood, but that is beyond the scope of this product anyways. The duct is sturdy and moves to where you need it and how thoughtful they were to include silicone intakes which help if this is for soldering as spatter will not stick to it and ruin the tube. Overall, this is a great value for the money. Very happy.
I wish the unit was easier to connect to my xtool D1 pro laser engraver, yet I was able to connect the hose from the enclosure to your hose using electrical tape to seal off the hoses. Works great and no smoke smell in my shop at all. Thanks
Works great, I can feel the air quality got better by just turning it on.
I recently got a laser engraver and while I love making things with the engraver, the smoke/fumes that happen during engraving can be a bit much at times. I already knew prior to starting that I should be in a fairly well ventilated room, but even still it can be a bit much at times. I built a small enclosure for the engraver and while that helped a bit, it was still an issue. When I came across this fume extractor I had my doubts at first but it also sounded like the exact solution I needed. Helps a lot with the fumes and smoke, knocks down the smell immensely. About as loud as a handheld vacuum when running. I don't use the engraver all too often and haven't had to change out the filters yet. However, I did remove them after a few weeks just to check and they seemed like they were still in really great shape. Works well, a bit on the pricier side but helpful nonetheless.
Good for small smoke and fumes, but not for Xtool S1 laser cutter. I am buying a larger one, that Xtool recommends, It cost over $700 but might be worth it. Have n ot tried it yet. But I will still keep this small one for smaller jobs, soldering etc..
5-7 Business Delivery
We usually pack your order within 2 business days. Final delivery takes 5-7 working days.
24/7 Supprt
For questions and problems, you can always
get in touch with our support team.
Emal us：support@fumeclear.com
Let's Hear What Our
Customers Say
SoundMan
I was not expecting this level of quality. This is actually well made and the electronic controls were a big plus. In fact, it seemed a bit over-designed. Overall, the suction is good for general laser engraving and cutting 3mm plywood, and the multiple filters held up well. It’s built like a tank and delivered on the listing promise. I should note, this would not be big enough for laser cutting 1/2” wood, but that is beyond the scope of this product anyways. The duct is sturdy and moves to where you need it and how thoughtful they were to include silicone intakes which help if this is for soldering as spatter will not stick to it and ruin the tube. Overall, this is a great value for the money. Very happy.
0
0
Jul 22, 2024
I wish the unit was easier to connect to my xtool D1 pro laser engraver, yet I was able to connect the hose from the enclosure to your hose using electrical tape to seal off the hoses. Works great and no smoke smell in my shop at all. Thanks
2
0
Jul 15, 2024
Bowie
My unit had come with a tube that was too large for the attachment site,.. Company responded quickly and sent another, which was unfortunately the same size larger tube. Company again responded quickly and sent one directly from Hong Kong,.. wait time was a bit longer but this time was the correct tube, they also sent me additional filter for the inconvenience,..
As for the unit itself,.. for my application works great!! no smells intruding into my living space,... NICE!!
It is a bit loud,. but no big deal to me. I use this for extracting fumes from 20 watt laser engraving machine.
THANK YOU Fumeclear!!!
0
0
Dec 24, 2023
Frequently Asked Questions
Still have questions? Send us your questions by filling out the form below, we will be happy to assist you.
Does FC-2002 work with laser engraving machines such as F1/S1/M1/D1 Pro?
Of course! The FC2002 fume extractor is very suitable for laser engravers with 10-20W laser power. Its 260m³/h air intake ensures complete absorption of the fumes generated during laser engraving.
Where to buy replacement filters？
You can find the FC-2002 replacement filter set here.
How often are main carbon filters and medium hepa filters generally replaced?
If used normally, our high efficiency activated carbon main filter generally needs to be replaced only once in 8 months to 1 year. The glass fiber hepa-filter is generally changed once every 3 months to 6 months.
What if my FC-2002 laser fume extractor breaks down due to an accident?
Don't worry, the Fumeclear team will be at your full disposal until the situation is resolved. Furthermore, all Fumeclear series fume extractors are equipped with a spare fuse inside the machine.
What type of battery does the remote control use?
Our remote control unified use of CR2025 button cell, the remote control has been equipped with a, can be used directly.
Thanks for subscribing!
This email has been registered!