FC-100A Fume Extractor Filter Sets
- $99.00 USD
- $99.00 USD
- (-0%)
- Unit price
- per
10 customers are viewing this product
FC-100A Fume Extractor Filter Sets When the soldering smoke is drawn in.
- The 1st layer pre-filter filters out the large particles in the exhaust.
- The 2nd layer of the hepa filter immediately afterwards filters most of the dust below 0.3 microns.
- Finally, the fume residue is completely filtered by the 3rd layer of main carbon filters and is converted into fresh air discharge from the exhaust port, and the purification rate can reach 99.97%.
Pre-filters are designed to filter large airborne particles such as wood chips, iron filings, plastic debris, etc. Service life about 168-240 hours
Medium Hepa filters are used to filter tiny particles floating in the air, such as iron powder, wood dust, etc., to prevent inhalation into the lungs. Service life about 960 hours
The main carbon filter is used to purify invisible harmful gases and powder dust below 0.3 microns, and the activated carbon particles in the cartridge will firmly adsorb the harmful substances in the smoke. The purification effect is up to 99.97%, truly guarding your health. Service life about 1300 hours
Give you a truly healthy and pollution-free living environment.
3-Layer Filter Structure
The package includes
- 5 pieces of Pre-filter,
- 1 piece of Medium hepa filter
- 1 piece of Main carbon filter.
The combination of Medium hepa filter and Main carbon filter has a normal service life of up to 2260 hours.
|
|
|
|
|---|---|---|
Pre-filterPre-filters are designed to filter large airborne particles such as wood chips, iron filings, plastic debris, etc. Service life about 168-240 hours |
Medium Hepa FilterMedium Hepa filters are used to filter tiny particles floating in the air, such as iron powder, wood dust, etc., to prevent inhalation into the lungs. Service life about 2160 hours |
Main Carbon FilterThe main carbon filter is used to purify invisible harmful gases and powder dust below 0.3 microns, and the activated carbon particles in the cartridge will firmly adsorb the harmful substances in the smoke. The purification effect is up to 99.97%, truly guarding your health. Service life about 3000 hours |
Suggestions for use
If you are engaged in work that tends to produce large particulate matter, we recommend placing 2 pre-filters in the FC-100A. This provides better filtration and can extend the life of the main filter.In addition, clean off the large particles of impurities on the used pre-filter, which can be reused as appropriate.
Applicable to FC100A series
The FC-100A has a maximum operating noise of only 50db,which is the sound level of a quite conversation in the library.Ideal for a variety of scenarios that require focus and quiet,such as factory assembly line,hand soldering,laser welding,etc.
When you are working in front of a soldering station and your clients are complaining about the fumes and impurities in the air.Believe me,This machine can help you solve these problems perfectly!
Related Products
Recently Viewed Products
- Choosing a selection results in a full page refresh.